Coriolis mass flowmeter provider by bjssae.com: What is the difference between a mass flowmeter and a volumetric flowmeter? Differene between Mass flow vs volumetric flow.If high accuracy is not required when measuring volumetric flow, volumetric flow meters are recommended. However, to compare results, volume flow meters need to be compensated for temperature and pressure. A mass flow meter, on the other hand, measures flow rate regardless of gas pressure or temperature. Discover even more info at coriolis mass flow meter manufacturers.
Comprehensively consider the use requirements and procurement costs of gas turbine flowmeters. When the customized gas turbine flow meter did not appear in the domestic brand, the international brand can be said to be a super profitable product. A medium-sized gas turbine flow requires hundreds of thousands or even hundreds of thousands of yuan. And our domestic brands struggle tenaciously in a harsh environment where the strength and weakness are not an order of magnitude at all. It can be seen that when selecting a gas turbine flow meter, there are many factors to be considered, not only from before the purchase, but also after the purchase of the gas turbine flowmeter, all of which need to be considered. When choosing a gas turbine flowmeter, you must be careful!
Is the scope of application of turbine flow meter very wide? Suitable for more industries: This product is suitable for power generation, petrochemical, metallurgy and coal mining industries. Can measure more media: Because it can measure oil, organic liquid, inorganic liquid, liquefied gas, natural gas, coal gas and other media, the sales volume of the product will also be higher. The quality of professional manufacturers is more guaranteed: At present, only manufacturers with advanced technology and strong strength can produce products with more reliable quality. Measurement of some corrosive liquids, such as sulfuric acid, hydrochloric acid, nitric acid, acetic acid and other acids and various chemical solutions.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.
Thermal mass flow meters are suitable for all industrial and test platform applications that require fast, accurate gas measurement. The insertion thermal mass flow meter directly indicates the mass flow or standardized volume flow of the gas without any additional pressure and temperature compensation. They have impressive high accuracy, short response times and a very wide flow range, with almost no loss of accuracy even at the lowest flow. See extra information at https://www.bjssae.com/.
Inner software: For the inner software, we can even customize the inner software with your own company’s name and information. Standard color: If the ordering quantity is big , we can customize the color of the transmitters on the coriolis mass flow meters for you. The standard color is dark grey. We are providing the complete measuring solutions, not only one single unit of coriolis mass flow meter. Sometimes even though it is not the problem of our coriolis mass flow meters or thermal mass flow meter, we will still help you solve the problems.
The output of the vortex flow meter is only proportional to the flow rate of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the vortex flow meter is negligible, so it can be considered that the output of the vortex flow meter is entirely composed of It is caused by wetting the dry part (saturated part) of each steam, and the density of the dry part can be accurately detected by pressure compensation or temperature compensation. When steam is measured, if the two parties agree to settle the fee according to the dry part of the steam, and the condensed water is not charged, the impact on the relative measurement is negligible and can be ignored; if the condensed water is also charged according to the steam, the measurement result of the vortex meter is low.
