Need hail or dent repair done on your vehicle?? What is paintless dent repair? Auto technicians use paintless dent repair (PDR) to make the process totally painless. By accessing the damaged area of the vehicle from beneath the dent, the exterior can be pushed back into its former shape. So long as the technician can access the underside of the body panel, this technique is a viable option. Paintless dent repair actually involves a few techniques. In some cases, specialty tools use suction to pull the dented area back into shape. The auto body repair technician uses tools to access the vehicle’s steel or aluminum paneling. After getting into the car’s paneling, the technician can repair the dents on the vehicle without the need to match the vehicle’s paint and thus sparing the customer from an expensive paint job. In other cases, a customer may want to get their car painted, but dents need to be removed first to create a smooth surface area. No matter the reason, paintless dent removal saves customers time and money.
Just like any skill, PDR takes a significant amount of time to master. NOCO always recommends you see a professional in order to be fully satisfied with a repair. However, it is possible to remove dents yourself at home, granted you have the correct tools. Properly removing dents involves getting the special metal rods and body picks to push out dents from the underside of the body panel. This is easier said than done, as you simply cannot place your hand behind the panel you need to work with. There are liners and multiple panels that will may need to be removed to get to the working surface. On top of this, PDR is very much a technique of “fine tuning,” meaning that it is easy to push too hard and make the dent worse and/or cracking the paint.
The PDR techniques are applied using three different procedures, depending on their suitability for each particular case: Using metal rods to exert the necessary pressure from the inside out to remove the dent. Utilising hot-melt adhesives that make it possible to work from the outside when the characteristics of the panel or its damage make the use of rods unadvisable or impossible. Applying controlled heat through magnetic induction, a technique developed to restore the original strength of the steel that has been weakened by hard impacts. Thus, the panel recovers its rigidity through controlled changes in the temperature of the affected spot.
Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. Push-from-behind PDR is completed by using specialized tools, including rods, to push the dent from the back of the vehicle’s panel. The deeper and wider the dent, the more time and manual effort it’ll take to fix. The more tools and rods you’ll have at your disposal, the more flexibility you’ll have to fix the particular dent. The repaired dent may have inconsistencies in the clear coat from the PDR process, as well as from when the dent occurred. In order to return the paint to its factory luster, the PDR Tech will use wet-sanding combined with a high-speed polisher. Using this tactic until the clear coat is perfectly smooth is the “finishing” touch of a great PDR repair.
Joe Dent can fix your car in as little as one day and save you money too. Plus, the factory paint stays intact. You keep your original paint warranty and the rust and chip protection only the original paint can give. To preserve your car and when dent repair is performed correctly it will retain its original manufacturer paint warranty. It also helps maintain your cars original appearance and saves you money as you get better results for a fraction of the cost. Not only that, we save our customers time while also protecting the environment. We can repair your auto hail damage very quickly where as an auto body shop would take up to three weeks, possibly more. We do not use hazardous chemicals, so no toxins are released into the air.
Paintless dent repair: Paintless dent repair (PDR) is a repair technique that has grown in popularity throughout the years. This method entails using special dent removal tools to effectively push out the dent from underneath the body panel to make it look like new on the outside. An alternative technique is to use a dent puller tool to pull the dent outward to achieve a smooth appearance. How to use PDR to fix hail damage: Gain access to the underside of the dent by removing the necessary trims. Use a dent removal tool to gently push the dent outward. We offer hail damage removal tools in an assortment of sizes to safely remove dents small and large. See even more info on removing minor dents Colorado Springs, CO.
What is Paintless Dent Repair? Do Auto Body Shops Recommend Paintless Dent Repair? Paintless dent repair (PDR) refers to a method of removing car dents while keeping the original paint intact. The process sometimes takes only a few minutes–your vehicle no longer has to stay at the auto body shop for days or even weeks. PDR approaches damaged parts of the surface from the inside, which seems more complex than it actually is. This method of repair may be used on steel and aluminum panels. The most common use for PDR is the repair of large dents, hail damage, minor creases, bodyline damage, and door dings.
